Lamella tube settlers installed in a clarifier

Is your settling tank struggling to keep up with higher flows? Building a new clarifier is costly and slow. Instead, many plants now install lamella tube settlers inside the tanks they already have. In this post, we show how this simple upgrade works and why Enke Group modules are a smart choice.

What Are Lamella Tube Settlers?

Lamella tube settlers are packs of inclined channels that sit inside a settling tank. Water flows upward through the channels, while solids settle on the sloped surfaces. The settled sludge then slides down and drops to the tank floor.

Each channel acts like a small, shallow clarifier. As a result, particles only need to fall a short distance before they reach a surface. For this reason, a lamella pack gives a tank far more effective settling area without making it bigger.

How Lamella Tube Settlers Boost Clarifier Capacity

A conventional clarifier relies only on its floor area. In contrast, lamella modules add the projected area of every channel. Therefore, the same tank can often handle two to three times more flow at the same effluent quality.

This brings several clear benefits:

  • Higher flow, same tank: You raise capacity without new concrete or extra land.
  • Clearer effluent: Moreover, lower turbidity and TSS protect filters and downstream processes.
  • Fast installation: In most cases, crews fit the modules during a short shutdown.
  • Lower cost: Similarly, a retrofit usually costs far less than a new basin.

For a full introduction to the technology, read our guide on what a lamella clarifier is.

Why Choose Enke Group Lamella Modules

Enke Group supplies lamella tube settler packs for both new and existing clarifiers. Our modules use a standard 60° angle. Thanks to this steep slope, sludge slides off by itself, so the channels stay clean.

We build the modules from durable, UV-resistant plastic. Consequently, they resist corrosion, sunlight and most process chemicals. They are also light, so your team can lift and place them without heavy cranes.

In addition, our engineers size each pack to your flow, solids load and tank shape. We also supply matching support frames and effluent launders when needed.

Where Lamella Settlers Work Best

Lamella tube settlers suit a wide range of plants. For example, drinking water plants use them after coagulation and flocculation. Likewise, wastewater plants fit them in secondary clarifiers to stop solids carry-over.

Industrial sites benefit as well. Metal finishing, mining and food plants often use lamella packs to remove fine solids. In addition, filter backwash recovery systems rely on them to save water.

For more background, see this overview of the lamella clarifier design.

Simple Care for Long Service Life

Lamella tube settlers need very little maintenance. Usually, a quick rinse with a water hose during routine checks keeps the channels open. Also, check the sludge removal system regularly so solids do not build up under the packs.

With good care, the modules give many years of reliable service. In short, they offer a low-effort way to get more from every tank.

Upgrade Your Clarifier With Enke Group

Do you need more capacity or clearer water from your existing tanks? Lamella tube settlers may be the fastest route. Contact Enke Group today for a free sizing study and a quote. Together, we will find the right module for your plant.